http://www.bikercamps.com/diy-motorcycle-ramp Motorcycle Camping, Motorcycle Rallies and More Mon, 19 Dec 2011 21:05:30 +0000 hourly 1 http://wordpress.org/?v=abc http://www.bikercamps.com/diy-motorcycle-ramp/comment-page-1#comment-32 Kevin Sun, 02 Oct 2011 23:33:58 +0000 http://www.bikercamps.com/?p=734#comment-32 Kent, Thanks for posting these instructions. My ramp works great and is much safer than the 6 ft, one-wheel-wide ramp that I am replacing. Great write-up. Thank you. If I may offer 2 comments/question. 1) What is the best way to bend the 1/4" thick metal horns? After the horns were attached, I pounded on them with a rubber mallot and ended up splintering the plywood. 2) For the clntch bolts you wrote 1/5" width instead of 1/2" width bolt Kent,
Thanks for posting these instructions. My ramp works great and is much safer than the 6 ft, one-wheel-wide ramp that I am replacing.
Great write-up. Thank you. If I may offer 2 comments/question.
1) What is the best way to bend the 1/4" thick metal horns? After the horns were attached, I pounded on them with a rubber mallot and ended up splintering the plywood.
2) For the clntch bolts you wrote 1/5" width instead of 1/2" width bolt

]]> http://www.bikercamps.com/diy-motorcycle-ramp/comment-page-1#comment-31 Safari type rack for pickups - Stromtrooper Forum : Suzuki V-Strom Motorcycle Forums Thu, 04 Aug 2011 23:59:28 +0000 http://www.bikercamps.com/?p=734#comment-31 [...] built a DIY ramp using a variation on the plans presented here. Loaded my wee up nicely. I figure I'm into it for roughly 30-40% of what a decent quality pre-fab [...] [...] built a DIY ramp using a variation on the plans presented here. Loaded my wee up nicely. I figure I'm into it for roughly 30-40% of what a decent quality pre-fab [...]

]]>